Categories
- All (57)
- Uncategorized (4)
- Sustainability (1)
- Engineering (25)
- Fundamentals (12)
- Services (11)
- Tenant Coordination (3)
- Facility Operations (5)
- Energy Solutions (3)
Tags
- All (57)
- Facility Operations (7)
- LEED (2)
- Lighting (4)
- Water Treatment (2)
- HVAC (3)
- Kitchen (1)
- Odor Control (2)
- Safety (5)
- Energy Audit (1)
- Food Court (1)
- Retail Design (1)
- fire protection (1)
- Restaurant (1)
- National Electric Code (2)
- Plumbing (2)
- Tenant Coordination (15)
- Fire Protection Agency (2)
- Restroom (1)
- Piping (2)
- Electrical Engineering (15)
- Right-Sizing (4)
- Products (1)
- Mechanical Engineering (11)
- Code (1)
- Energy (1)
- Boiler Room (5)
- Vs. (1)
- Commissioning (1)
- Expansion Tanks (1)
- ADA (1)
- Leasing (1)
- Equipment Layout (1)
- Universal Design (1)
- Curb Adapter (1)
- Calculations & Formulas (3)
- Grease (1)
- Rooftop (1)
- Rules of Thumb (1)
- Bid Documents (1)
- Central Plant (2)
- NEC (1)
- Before You Build (1)
- Comfort Issues (1)
- Workplace (1)
- Air Conditioning (4)
- Circuits (1)
Archives
Preventing Power Outage Annoyances in Commercial Spaces with Batteries
Posted on in Engineering
It was a dark and stormy night. As you’re lounging on your couch, relaxing from your workday, everything goes black. No lights, no television, and no margarita machine. Power outages occur from time to time in different spaces, but thanks to electric codes (and smart engineering) lighting can be restored and safety ensured in commercial […]
read more
Control of Lighting and Branch Circuit Loads
Posted on in Engineering
THE CONTROL OF LIGHTING AND BRANCH CIRCUIT LOADS, WHETHER FOR CODE COMPLIANCE, CONVENIENCE, OR LOAD OPERATION FUNCTIONS, IS TYPICALLY PROVIDED BY CONTACTORS, LOW VOLTAGE RELAY PANELS, OR SMART BREAKERS CONTACTORS Contactors are historically the most common type of control device. Contactors can be of the three pole type, with a high ampere rating and […]
read more
Combating Light Pollution
Posted on in Engineering
Light trespass and light pollution are on the front burner of many municipalities in the U.S. due to the perception of wasted energy or impingement upon usage options of neighboring properties. There are new codified ordinances that restrict exterior light levels, pole heights, pole locations, lamp type/wattage, or watts/sq ft. The USGBC offers a Light […]
read more
How to Avoid Grease on Rooftops
Posted on in Engineering
Grease on a roof can put you on a slippery slope toward leaks, expensive repairs, voided warranties, unsafe work areas, fire hazards, and lawsuits. Sometimes, it causes local fire authorities to fine building owners or tenants and shut them down. Chances are you have a food court or other food type tenants. Have you seen […]
read more
Electrical Engineering : What is Dirty Power?
Posted on in Engineering, Fundamentals
“Dirty power” is an abnormality in the power quality that is being delivered to a system. These abnormalities can include low power factor, voltage variations, frequency variations, and surges. All electrical systems are based on a supply of power at a certain voltage and frequency. Equipment and electronic devices are chosen based on this expected […]
Previous STORY
